HP LaserJet Pro MFP M130a toner cartridges

Q: Can I use a compatible or refilled cartridge?

You can, but yield, quality and level reporting vary. We sell only original HP cartridges.

The HP LaserJet Pro MFP M130a uses the HP 19A (CF219A, 12,000 pages) imaging drum — genuine HP only, from $79.

Photos: HP

The HP LaserJet Pro MFP M130a is an entry-level monochrome laser all-in-one (print, copy, scan) for a single desk. It prints up to 22 ppm on A4 paper at 600 x 600 dpi, driven by a 600 MHz processor with 128 MB of memory, and connects by USB 2.0.

The 150-sheet tray and two-digit LED display keep it simple, and HP recommends 150 to 1,500 pages a month with a 10,000-page duty cycle. It suits light home-office use where networking is not needed.

Its supplies are split into the HP 17A toner cartridge and the separate HP 19A imaging drum (about 12,000 pages), which GS Toner sells as a genuine HP original.

HP LaserJet Pro MFP M130a specifications

Printer type	Monochrome laser multifunction (print, copy, scan)
Print speed	Up to 22 ppm (A4)
Print resolution	Up to 600 x 600 dpi
Copy resolution	Up to 600 x 400 dpi
Paper capacity	150-sheet input tray
Processor / memory	600 MHz, 128 MB
Display	Two-digit LED
Connectivity	USB 2.0
Recommended monthly volume	150–1,500 pages (duty cycle 10,000)
Cartridges	HP 19A imaging drum (CF219A, 12,000 pages); HP 17A toner

Genuine cartridges for this printer

HP 19A Imaging Drum

$70.00

$88.00 $70.00

In stock

The HP LaserJet Pro MFP M130a uses the HP 19A (CF219A, 12,000 pages) imaging drum — genuine HP only, from $79.

Which cartridge fits the HP LaserJet Pro MFP M130a

HP 19A Imaging Drum — CF219A, 12,000 pages, $79

Why use genuine HP toner

Original HP cartridges are built and tested for the HP LaserJet Pro MFP M130a: the chip reports toner levels correctly, print quality and page yield match HP's ratings, and your printer warranty is not affected. Every cartridge we sell is factory-sealed original HP — never refilled, never compatible.

FAQ

How do I know which cartridge my HP LaserJet Pro MFP M130a takes?

Check the label inside the toner door or the model number on the old cartridge; the cartridges listed above are the ones HP specifies for this printer.